Danlers White PIR Occupancy Switch - Ceiling Flush 

This Danlers PIR Occupancy Switch can be flush mounted into suspended and plasterboard ceilings. This PIR switch detects movement and uses a photocell sensor to detect the ambient light level. 

What are the benefits of this PIR Occupancy Switch? 

- 2 Metre Connecting Flex to make installation quicker and easier

- PIR sensor to detect movement

- Photocell to monitor ambient light level 

- Ambient threshhold can be set by user 

Product Features

- Upon detecting movement, if the ambient light is dark enough, the PIR switch will turn the load on.

- The ambient threshold can be set by the user to between approximately 30 lux and 1000 lux and maximum (photocell inactive) at the PIR via the LUX adjuster (diagram D).

- If no more movement is detected within a pre-selected time, then the PIR switch will turn the load off. This time lag can be set via the TIME adjuster to 10 seconds, 20 seconds, 40 seconds, 80 seconds, 2 minutes 30 seconds. 

-The switch should only be connected to a 230V 50Hz AC supply.